Fuzzy Floor
 Cage Level
Habitat Extender

Parts and Installation

The Fuzzy Floor Cage Level for the Ferret Nation Cage



The front dowel which supports the Fuzzy Floor for the Ferret Nation cage is spring loaded and designed to fit inside the cage just behind the doors. The dowel is positioned against the side rails of the cage and the two spring loaded ends hold the dowel firmly in place.



View with the doors shut.


View with both doors open.


Velcro fasteners closed and open.


Easy open and close Velcro fasteners.


View from inside of cage of Fuzzy Floor connecting to the inside back of doors. The Velcro fasteners hold the dowel snuggly against the back of the door so there is not a gap to get caught in.


There are rubber grommets on each spring loaded end which hold the dowel securely against the cage side rails. The rubber grommets are compressed when the dowel is inserted and are not accessible to the ferrets.


Fuzzy Floor
 Cage Level
Habitat Extender

Maintenance and Washing Instructions

The Fuzzy Floor system may be cleaned quickly and easily while it is installed in the cage by vacuuming the surface using the upholstery attachment on a vacuum cleaner. It is natural for the interior lining to shed a little as the floor gets worn in.

For thorough cleaning, machine wash on cold and dry on low. The materials used are preshrunk although washing on hot or drying on high may cause additional shrinkage making reinstallation harder than necessary. Pocket and Basement models may be pulled inside out for washing although it is not usually necessary. Inserting the vacuum nozzle into the center prior to machine washing is generally sufficient. *

*Applies to Pocketed and Basement Models.

Acrylic dowels may be safely washed in hot soapy water or sanitized with any pet friendly sanitizer.

If you have any problems or questions please feel free to call me @ (321) 373-7303 or email me karen@ferretaffair.com

.